Skip to main content

Engineering Information

Home ... Engineering Information in DC fan motors in Specifications in 1. Common Specifications

DC fan motors - 1. Common Specifications

DC Fans Common Specifications

Standard

Vibration Test

Conforms to JIS C 60068-2-6
Peak-to-Peak value of a vibration: 1.5mm
Frequency 10 to 55 Hz, 1 hour each in the X, Y and Z directions.

Shock Test

Conforms to JIS C 60068-2-27
Acceleration 981 m/s2*
Application time 6 ms once each in the X, Y and Z directions

Note: Acceleration rate 500 m/s2, Application time 11 ms once each in the X, Y and Z directions.

Application Model
General 02510SS 03010SS 03510SS 03515SS
04010SS 04010KA 2004KL 2404KL
Blower Fan 04520GA 05020GA - -
Refrigerator All Models
Burnout Protection

The fan motor will not burnout when restricted for 72 hours at the rated voltage.

Polarity Protection

The reverse connection at the rated voltage will not cause damage.

Insulation Class

E class (UL: CLASS A)

Protection System

Motor burnout is prevented by the current cut-off automatic restoration function.

Standard values

Max. Air quantity, Max static pressure, Rotations, Drive noise (Intake side), Mass, Rating current, Rating input

Notes

  • Additional performance requirements may be determined between manufacturer and customer, based on the customer's request.
  • Fans may be installed in a horizontal, vertical, or angled position.

DC Fan Motor Recommended Connectors

Connector Pitch Housing Contact Manufacturer
2mm PHR-*
A2001H02-*P
173977-*
SPH-002T-P0.5S
A2001T0P-2
(Touch Type)
JST
JWT
Tyco Electronics
2.5mm EHR-*
A2502H02-*P
XHP-*
A2501H02-*P
SEH-001T-P0.6
A2502T0P-2
SXH-001T-P0.6
A2501T0P-2
JST
JWT
JST
JWT

Note: *mark means the number of pole. For example "2" means 2 poles and "3" means 3 poles.

このページの上部へ

Home の中の Engineering Information in DC fan motors in Specifications in 1. Common Specifications